Xi'an Xu&Hui Electromechanical Technology Co., Ltd.
Xi'an Xu&Hui Electromechanical Technology Co., Ltd.
Add to Cart
The on-load tap-changer is the only moving part that is connected to the transformer circuit, so the detection of the on-load tap-changer is getting more and more attention. In the "Procedures for Handling and Preventive Tests for Electrical Equipment", it is required to check the sequence of actions and the switching time of the on-load tap-changer.
The XHYZ1668A on-load tap-changer tester is mainly used to measure the transition waveform, transition time, transient resistance value, and three-phase synchronization of the on-load tap-changer.
* The instrument has large output current and its weight is light;
| Output current | 1.0A, 0.5A |
| Test range | Transition resistance: 0.5Ω~20Ω(1.0A), 0.5Ω~40Ω(0.5A) |
| Transition time: 0 ~ 250ms | |
| Test accuracy | Transition resistance: ± (5% reading + 3 words) |
| Transition time: ± (0.1% reading + 3 words) | |
| Storage mode | U disk storage, local storage |
| Ambient temperature | -10 ° C ~ 50 ° C |
| Ambient humidity | ≤85%RH |
| Working power supply | AC220V±10% |
| Power frequency | 50±1Hz |
| Size | 345 × 295 × 175mm |
| Weight | 5kg |